|
|
|
Phos 'n' DOC Remover 1000ml |
|
PHOS 'n' DOC REMOVER
A 50/50 mix of our popular and powerful Ferric Hydroxide XS Phosphate Remover and Activated Carbon Granulate.
The Ferric Hydroxide will control phosphate levels within your reef tank helping rid of nuisance algae's, while the Activated Carbon Granulate will clarify the water, removing toxins and dissolved organics carbons (DOC), eliminating any yellowing of the water and leaving your tank water looking crystal clear.
Entirely safe to use in a freshwater or marine aquaria.
USAGE:
Rinse before use in Reverse Osmosis water to remove any dust.
This product is best used in a fluidised reactor with a flow of approximately 600 litres per hour running through it.
Approx. 150g per 500 litres. Test phosphates regularly and increase or decrease the amount of media used depending on how quickly your phosphate level rises. Change the media at least every 4 weeks to keep the water crystal clear.
Test Phosphate levels regularly and aim to keep them below 0.1ppm in a freshwater aquarium or below 0.05ppm in a saltwater aquarium, once phosphate levels begin to rise, change the old media for new.
For optimum use, ensure you only top up evaporated water with good quality Reverse Osmosis water.
Alkalinity and pH levels may drop after initial placement in the aquarium, test these regularly and buffer as required.
CAUTION: FOR AQUARIUM USE ONLY, KEEP AWAY FROM CHILDREN.
Technical info:
Synthetic Iron Oxide, fully approved for use in drinking water by the UK Secretary of State, French Ministry of Health and the US National Sanitary Foundation (NSF61). Compliant with EN15029:2006.
This high quality specification ensures absolute safety to your delicate marine organisms and is guaranteed not to leach highly toxic metals such as Chromium and Aluminium which can be the case with cheaper industrial grade Ferric Oxides.
No posts found

